Our owner spent five years selling hot tubs before bringing Eco Spa to the Prairies — including Saskatchewan — because he believed in the product. His pitch hasn't changed: "EcoSpa uses less chemicals and less electricity than any other hot tub out there." Across a big, cold province with a thin dealer network, that combination matters more than the lights and waterfalls in a showroom.
Eco Spa serves a few of the Prairie provinces — Alberta, Saskatchewan, and Manitoba. Here is the Saskatchewan case, in our value order: energy-efficient, practically chemical-free, low-maintenance, and a lifetime warranty.
The Saskatchewan Case
-
01
Built to hold heat through a Saskatchewan winterAbout 70% of a hot tub's heat escapes through the top, so in a Saskatchewan winter the cover does the heavy lifting. Eco Spa runs an R-40 hard cover sealed with patented Power Clamps, an R-30 Ecobat wrap around the body, and a 2" air-chambered bottom. As we put it: "If it snows on this thing, you don't see snow melt — it just piles up. There's no heat transferring through the top." A foam cover that waterlogs can't do that; this one stays dry and seals down.
-
02
$10–60 a month — efficiency that pays off hereAll-in — power, chemicals, and filters — an Eco Spa runs about $10–60 a month depending on the model. We keep our E6, the largest tub, on a power meter: "It's just over a dollar a day in the winter time, 60 to 70 cents in the summertime — about $25 a month." We've seen buyers come from poorly insulated tubs that cost them $50–150 a month. The colder the winter, the more that insulation gap shows up on the bill.
-
03
Lake cabin 110V — no electrician to get goingCabin country in Saskatchewan — Emma Lake, Waskesiu, Candle Lake, Last Mountain Lake — usually has a standard outlet and not much more. Every standard Eco Spa is wired for both 110V and 220V with its own GFCI on the cord, so you can plug it into a standard wall outlet (12-amp draw) and skip running a new 220V line. Fill from the garden hose, plug in, and you're about 36 hours from your first soak. Want the 4kW heater later? Switch to 220V anytime — no parts to change, no decision up front.
-
04
Sits on any flat surface — deck or gravelThe shell is one rotationally-molded HDPE piece, so the strength is in the body. As we put it: "Put this on any flat surface. You can throw this on your deck. You can throw it on crushed gravel. You don't need that five-inch concrete slab that most hot tubs need." For a Saskatchewan acreage or a lake property, that's one less contractor and one less pour before you're in the water.
-
05
Practically chemical-free, a few minutes a monthThe HDPE shell is non-porous — the same material used in places like hospitals and underground water reservoirs — so bacteria struggles to grow on it. Backing that up as standard: two large filters for 100 feet of filtration that keep the water clean. That adds up to about a tablespoon of chlorine every one to two weeks and roughly three minutes of upkeep a month. Not zero chemicals — just far fewer than a conventional tub, which matters at a cabin you visit on weekends. Want to cut chemicals even further? The optional Ecozone ozone upgrade — the highest, most consistent ozone output you can put in a tub — adds another layer of sanitation (often thrown in as a bonus on a show deal).
-
06
Built not to break — and built to be servicedIn a province where the nearest authorized service tech can be hours away, the best repair is the one you never need. The unibody HDPE shell has no seams to delaminate and no gel-coat to craze, which is why Eco Spa carries a lifetime warranty on the cover and the entire structure — "we're the only company that does that." The R-30 body insulation is removable for service rather than sprayed solid, and the moving parts (jets, pump) use Gecko components with 2-year parts and labour.
The Saskatchewan Math
The number that matters in a cold province isn't the sticker — it's the monthly cost over years, plus the cost of repairs you didn't have to make. An Eco Spa runs $10–60 a month all-in, against the $50–150 a month we've seen poorly insulated tubs cost their owners. And because the shell doesn't crack or craze, you're not driving a tub to the city for a fix.
Heat stays where it belongs: an R-40 cover with Power Clamps, an R-30 removable body wrap, and a sealed unibody shell. In a Saskatchewan winter the heater barely has to work.
Our E6, on a power meter: "Just over a dollar a day in the winter time, 60 to 70 cents in the summertime — about $25 a month."
Lake Cabin Checklist for Saskatchewan
Before setting one up at a Saskatchewan lake property, confirm these:
- A standard 110V GFCI outlet within reach of where the tub will sit
- A flat, stable surface — gravel, compacted ground, or an existing deck that can hold the tub full of water
- A garden-hose connection nearby for filling
- A seasonal closing plan — drain the tub before any extended absence in deep cold
That's the short list. Ready for your numbers? Request a quote and we'll size it to your spot.